Geared Stepper Motor
NEMA 17 Geared Stepper Motor
The NEMA 17 geared stepper motor combines the compact 42 mm frame with planetary or worm gearbox options. Multiple reduction ratios and motor step angles of 0.9° or 1.8° support controlled positioning, feeding and adjustment in compact equipment.
The JSS MOTOR NEMA 17 geared stepper motor brings incremental motor movement and mechanical reduction together in one assembly. It suits equipment that needs controlled output speed, small movement increments and additional torque within limited space. The connected motor and gearbox provide the starting point for compact rotary motion functions.
Planetary gearbox options include 42 mm round and square designs. Round gearbox ratios cover 3:1–100:1, while square gearbox ratios cover 4:1–100:1. Worm gearbox options cover 15:1–60:1. These choices give you different combinations of reduction and transmission layout for feeding mechanisms, instrument adjustments and compact automation assemblies.
The two-phase motors feature the 42 × 42 mm flange, step angles of 0.9° or 1.8° and maximum motor holding torque up to 0.7 N·m. Available configurations include four or six lead wires, depending on the selected motor.
JSS MOTOR supports the NEMA 17 geared stepper motor for new designs, equipment upgrades and replacement requirements. Customization extends across electrical specifications, gearbox selection, mechanical interfaces and connection details, helping you fit the assembly around the equipment’s function.
What Is the NEMA 17 Geared Stepper Motor?
The NEMA 17 geared stepper motor combines the incremental rotation of the stepper motor with the reduction provided by the gearbox. The motor drives the gearbox input, while the output turns at reduced speed and through smaller angular increments. Gear reduction also increases output torque, subject to the motor’s capability, transmission losses and gearbox limits.
NEMA 17 identifies the motor frame format, with the supplied configurations using the 42 × 42 mm flange. Available full-step angles include 0.9° and 1.8°, corresponding to 400 and 200 full steps per motor revolution. The gearbox further divides these movements at the output.
For example, with 10:1 reduction, ten motor revolutions produce one output revolution. The same relationship applies to individual steps, allowing the mechanism to make small changes in position. This is useful for gradual adjustments, short feed movements and indexing between process positions.
Planetary gearboxes provide aligned input and output rotation. Worm gearboxes provide the right-angle arrangement often needed when the motor must sit alongside the driven mechanism. Both options allow the transmission layout to be considered as part of the equipment design.
The NEMA 17 geared stepper motor can therefore be configured around several requirements at once: output movement, load, available space and the way the motor connects to the mechanism. Fine output increments help define movement commands, while actual positioning accuracy also depends on backlash, mechanical clearances and load conditions. Matching these characteristics to the task is particularly useful for equipment that makes repeated adjustments or changes direction during operation.
Why Choose JSS MOTOR NEMA 17 Geared Stepper Motors?
Increased Output Torque
The NEMA 17 geared stepper motor combines the compact motor with reduction gearing to increase output torque within the selected motor and gearbox ratings. This gives the assembly greater turning capability at reduced output speed while retaining the 42 mm motor frame. Multiple reduction ratios provide flexibility across different output speed and torque requirements.
Planetary and Worm Gearbox Options
Round and square planetary gearbox designs provide aligned input and output rotation, with reduction ratios covering 3:1–100:1 across the available configurations. Worm gearbox options provide the right-angle arrangement with ratios from 15:1 to 60:1. These choices offer flexibility in both output characteristics and assembly layout, helping you accommodate different mechanical requirements within compact equipment.
Fine Output Resolution
The NEMA 17 geared stepper motor combines 0.9° or 1.8° motor step angles with gearbox reduction to produce small angular increments at the output. Each motor step translates into reduced output rotation, supporting gradual adjustments and closely spaced movement commands. This fine resolution allows the assembly to deliver controlled incremental movement at low output speeds.
Compact Motor and Gearbox Assembly
The 42 × 42 mm motor flange provides the foundation for compact geared assemblies. Connecting the reduction gearbox directly to the motor keeps both components together as one unit. Planetary and worm layouts provide different ways to accommodate the assembly within restricted equipment space, helping you arrange the motion components around surrounding mechanisms.
Controlled Planetary Gearbox Backlash
The planetary gearbox options specify backlash limits of 15 arc-minutes for single-stage units and 20 arc-minutes for two-stage units. These defined limits help control lost movement when rotation reverses, supporting bidirectional adjustment and positioning. The specified gear clearance provides useful mechanical information for assemblies that repeatedly change direction.
Broad Customization Options
The NEMA 17 geared stepper motor supports customization across winding specifications, reduction ratios, shaft designs, cables, connectors, mechanical interfaces and dimensions. Protection, encoder and brake requirements can also be reviewed for the selected assembly. This flexibility lets you adapt both the motor and transmission to your equipment’s electrical requirements, mechanical layout and operating conditions.
NEMA 17 Geared Stepper Motor Specifications
The NEMA 17 geared stepper motor is available with different motor configurations and gearbox combinations. The following specifications summarize the supplied motor, planetary gearbox and worm gearbox options.
Motor and gearbox characteristics should be considered together when defining the assembly. The motor step angle describes rotation before reduction, while the gearbox ratio determines the relationship between motor movement and output movement.
Stepper Motor Specifications
| Parameter | Specification |
| Motor frame | NEMA 17 |
| Flange dimensions | 42 × 42 mm |
| Motor phases | 2 |
| Motor full-step angle | 0.9° or 1.8° |
| Full steps per motor revolution | 400 or 200 |
| Maximum motor holding torque | Up to 0.7 N·m |
| Lead wires | 4 or 6 |
Planetary Gearbox Specifications
Planetary gearbox options include 42 mm round and square designs, each available with single-stage and two-stage reduction. Round gearbox ratios cover 3:1–100:1, while square gearbox ratios cover 4:1–100:1. Nominal gearbox output torque ranges from 5 to 12 N·m, depending on the frame, stage and selected ratio. The listed planetary gearbox configurations provide IP54 protection.
| Parameter | Round — L1 | Round — L2 | Square — L1 | Square — L2 |
| Gear ratio range | 3:1–10:1 | 16:1–100:1 | 4:1–10:1 | 16:1–100:1 |
| Nominal gearbox output torque | 5–9 N·m | 10–12 N·m | 5–9 N·m | 5–12 N·m |
| Nominal input speed | 1,000 rpm | 1,000 rpm | 1,000 rpm | 1,000 rpm |
| Maximum input speed | 2,000 rpm | 2,000 rpm | 2,000 rpm | 2,000 rpm |
| Radial load rating | 300 N | 300 N | 300 N | 300 N |
| Axial load rating | 100 N | 100 N | 100 N | 100 N |
| Efficiency | 96% | 94% | 96% | 94% |
| Backlash | ≤15 arcmin | ≤20 arcmin | ≤15 arcmin | ≤20 arcmin |
| Protection rating | IP54 | IP54 | IP54 | IP54 |
L1 identifies single-stage reduction; L2 identifies two-stage reduction.
Worm Gearbox Specifications
The NMRV25 worm gearbox option covers ratios from 15:1 to 60:1. Supplied mechanical specifications include the 9 mm input bore, 11 mm output bore and gearbox weight of 0.7 kg.
The available ratios provide several output configurations for the NEMA 17 geared stepper motor. Efficiency varies with the selected ratio, as shown below.
| Gear Ratio | Listed Gearbox Output Torque | Listed Efficiency |
| 15:1 | 7.3 N·m | 80% |
| 20:1 | 9.2 N·m | 55–70% |
| 25:1 | 10 N·m | 55–70% |
| 30:1 | 12 N·m | 55–70% |
| 40:1 | 15 N·m | 55–70% |
| 50:1 | 12 N·m | 55–70% |
| 60:1 | 14 N·m | 45–55% |
NEMA 17 Geared Stepper Motor Mechanical Dimensions
Please contact us for mechanical drawings of specific NEMA 17 geared stepper motor models or customized configurations.
Applications of NEMA 17 Geared Stepper Motors
Laboratory and Instrument Adjustment
Sample selectors, instrument controls and compact positioning mechanisms often need small, controlled changes in rotation. The NEMA 17 geared stepper motor provides reduction options for these functions, with the motor and gearbox selected around the mechanism’s movement and load.
Gear reduction is useful where internal components must move gradually or stop at defined positions. Different output arrangements also help accommodate the layout of sample paths, sensors and instrument housings.
Compact Feeding and Indexing Equipment
Small feeders and indexing assemblies require controlled movement between process positions. Different reduction ratios allow output rotation to suit the intended feed or index cycle.
The NEMA 17 geared stepper motor can be configured for short movements, repeated advances and rotary positioning within compact equipment. Planetary gearbox backlash specifications also provide useful information for mechanisms that change direction as part of the cycle.
Packaging and Labeling Machinery
Packaging equipment can include motorized guides, format adjustments and auxiliary feeding mechanisms. The NEMA 17 geared stepper motor supports these functions where its output characteristics suit the task.
Planetary and worm configurations provide layout options for different positions within the machine. Custom shafts and connection arrangements can help align the assembly with existing components during equipment development, format changes or upgrades.
Optical and Inspection Equipment
Motorized optical adjustments, camera positioning mechanisms and inspection fixtures often require small output movements within enclosed assemblies. Gear reduction supports gradual positioning while allowing the motor to operate through multiple steps for each output movement.
The selected gearbox’s backlash and transmission layout can be considered alongside the optical or inspection mechanism. This is particularly relevant where movement reverses between inspection positions or adjustment points.
Compact Automation and Rotary Mechanisms
Small rotary actuators, adjustment axes and light-duty robotic mechanisms can use geared stepper assemblies for controlled movement. The NEMA 17 geared stepper motor brings the motor and reduction unit together for these functions.
Gearbox type, ratio and output interface can be configured around the connected components. This flexibility supports motion assemblies with different space constraints, movement cycles and electrical connection requirements within the same equipment project.
Need the Right NEMA 17 Geared Stepper Motor?
Share your NEMA 17 geared stepper motor requirements with JSS MOTOR, including the required output speed, load, movement cycle and available space. Information about direction changes, shaft details, protection and electrical connections helps our team review the complete assembly.
NEMA17 Geared Stepper Motor Supplier
About JSS MOTOR
JSS MOTOR specializes in the research, development and manufacture of motors and drives for motion control applications. Our range includes hybrid stepper motors, geared stepper motors, closed loop stepper systems, integrated motors, servo systems, brushless DC motors and motor drivers.
We support customers developing products, improving automation, upgrading equipment and sourcing replacement components. Product configuration and OEM customization address different electrical specifications, mechanical interfaces and operating requirements.
For your NEMA 17 geared stepper motor project, our team can assist with specification review, customization discussions and documentation for the selected assembly. Motor, gearbox and connection details can be reviewed together to help define the product requirements for evaluation and production.
Download NEMA 17 Geared Stepper Motor Technical Drawings
Review motor specifications, planetary and worm gearbox data, and mechanical drawings for your selected NEMA 17 geared stepper motor. Documentation can also cover agreed customization details, including electrical configurations, output interfaces and connection arrangements.